Fan coil stepless speed regulation, Brushless dc) Temperature controller

by:Edison      2020-08-21

fan coil stepless speed regulation, Brushless dc) Temperature controller

a, product description

the thermostat controlled by large screen digital display technology ( Blue backlight) Through the indoor temperature NTC temperature sensor inside the thermostat, and compared with the users to set the temperature in real time. Automatically adjust the fan and the valve switch, finally achieve the purpose of keep indoor temperature.

2, technical parameters of

power: AC220v, 50/60 hz timing error: load current 1% valve: 3 a

: precision temperature setting range: 1 C + 5 C - 35 C power: 1 w

fan output control: 0 ~ 10 VDC output temperature sensor: NTC

3, usage,

open and close, work mode, press mode key, refrigeration, heating, manual ( Ventilation) Model transformation.

three, temperature setting:

according to switch to adjust the temperature; Temperature can be set to 5 - 35 degrees Celsius.

4, wind speed Settings:

1. Press set key to choose wind fan 1 ( Ultra-low) , 2 (fan, Low) , fan 3 ( C) , fan (4 High) , fan 5 ( Ultra high) , fan 6 ( Automatic) 。

2。 The automatic operation of the wind speed model, if & other; Indoor temperature & throughout; With & other; Set temperature & throughout; Is greater than the difference between the 4 c, the fan will run at high speed; If & other; Indoor temperature & throughout; With & other; Set temperature & throughout; For 3 ~ 4 c, the difference between the hvac thermostat will choose fan runs at high wind speed; If the difference between 2 ~ 3 degrees Celsius, the fan will run with the wind speed; If a difference of 1 ~ 2 degrees Celsius, the fan will run at low wind speed; If the difference between 0 ~ 1 degrees Celsius, the fan will run at low wind speed.

3。 When the room temperature and set temperature phase at the same time, the valve closed, fan closed ( The fan is controlled is optional) 。

5, menu mode:

1. Press mode key open four seconds, a thermostat into the menu to select mode. Continuous press mode key, implementation at the bottom of the screen & other; 1、2、3” Conversion between.

2。 Value & other; 1' - Temperature calibration interface, press the switch to adjust temperature correction, the default value is 0.

3。 Numerical & other; 2' - Fan fan, controllable and uncontrollable interface c0 said controllable, c1 said fan is not controlled. By pressing the switch, can be realized the switch between CO and C1; The default value is C0.

4。 Digital & other; 3' - Choose unit type and static pressure, first by increasing or decreasing the key selection unit types, and then by setting the key selector static pressure.

5。 Note: after waiting for 5 seconds automatically return to the main Settings interface.

6, installation note

1. To find a stable temperature in the room, not near the door or air conditioning.

2。 Before installation, must check the system circuit diagram, and according to the circuit connection circuit.


Over the years, has become very popular as more and more people are trying it out.
Zhuhai Edison Smart Home Co., Ltd. is a motorised valve services company that creates hvac expansion valve home thermostat for ac compressor control valve.Our services have brought great value to customers. Welcome to visit us at Edison HVAC Valves.
Further dialogue of Edison between the approaches, the chapter concludes, could lead to actionable advice on more robust policies that drive both structural change and competitiveness upgrading.
As the manufacturing procedure of heat pump thermostat becomes more regulated, the costs to businesses will increase and the workforce will suffer as a result.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you so much for your enquiry. We will get back to you ASAP